What should be done if the 12 Inch 220V Ceramic Cooktop fails to heat properly?

When the 12 Inch 220V Ceramic Cooktop fails to heat properly in winter, when we often cook hot pot, this 12 Inch 220V Ceramic Cooktop is indispensable. However, when frequently used, some minor problems may occur occasionally. Today, I will share with you how to deal with the problem of the cooktop not heating.

1. The sensor of the 12 Inch 220V Ceramic Cooktop is faulty.

Generally speaking, if the 12 Inch 220V Ceramic Cooktop does not heat up, it indicates that it has not detected the load pot. The 12 Inch 220V Ceramic Cooktop is basically composed of the electromagnetic heating control panel and the sensor in the middle of the coil. The 12 Inch 220V Ceramic Cooktop cannot heat up properly. What should be done? These parts are adhered to the glass plate of the 12 Inch 220V Ceramic Cooktop with cooling oil.

The sensor is mainly used to detect whether the 12 Inch 220V Ceramic Cooktop has a load. So when we use it, if we pick up the pot, the 12 Inch 220V Ceramic Cooktop will make a dripping sound. Therefore, if there is no such sound, the 12 Inch 220V Ceramic Cooktop of the consumer should be either the sensor is loose, or the sensor has fallen off and not stuck well on the glass plate. If the warranty period has expired, the editor suggests that you can check and disassemble it or take it for repair.

2. The circuit board of the 12 Inch 220V Ceramic Cooktop is faulty.

The circuit board is broken, what should be done if the 12 Inch 220V Ceramic Cooktop fails to heat up? Then it might be that the circuit board got damp and rotted. If many places are rotted, you should pay attention.

When the 12 Inch 220V Ceramic Cooktop is used for a long time, sometimes when cooking, the smoke from the cooking is too much, and the smoke enters the stove through the fan, causing oil to stick to the control circuit board. As long as the use time is long, the gears will jump. In severe cases, replace the control board.

When the 12 Inch 220V Ceramic Cooktop reaches the preset temperature, it will jump to the low-temperature gear, when the temperature drops, it will jump to the high-temperature gear, and it will maintain constant temperature heating within a certain range.

12 Inch 220V Ceramic Cooktop https://www.dopeninductioncook.com/2-burner-12-inch-220v-ceramic-cooktop-with-sensor-touch-control.html